Parts catalog

Description OEM 50-gallon aluminum diesel fuel tank assembly removed from a 2025 International 4x4 utility truck powered by a Cummins B6.7 with only 18,833 original miles. The truck sustained collision damage to the cab, but this fuel tank assembly was not impacted and was professionally removed. The tank is clean, straight, and includes the factory mounting brackets and step assembly. Specifications OEM International Fuel Tank Capacity: 50 Gallons (189 Liters) Material: Aluminum Fuel Type: Diesel Low-mileage take-off Removed from a truck with only 18,833 miles Includes Complete aluminum fuel tank OEM mounting brackets Frame mounts Step assembly Fuel sending unit Fuel pickup module Fuel cap Fuel lines (shown) Hardware shown in photos Condition Excellent used condition No visible dents or leaks Mounting brackets are straight Threads and fittings are in good condition Stored indoors after removal Sold exactly as pictured Removed From 2025 International Utility Truck VIN: 3HAEEMVN6SL314998 Cummins B6.7 Diesel 280 HP 4x4 18,833 Original Miles

$995

Strafford, MO

VIN: 3HAEEMMN6SL314998

Description OEM battery box and DEF tank assembly removed from a 2025 International 4x4 utility truck equipped with a Cummins B6.7 engine. This truck had only 18,833 original miles before being dismantled due to collision damage. The battery box and DEF system were not impacted and were removed as a complete assembly. This is an excellent low-mileage OEM take-off ready for installation. Includes OEM battery box assembly DEF (Diesel Exhaust Fluid) tank DEF filler neck and cap Mounting brackets Battery cables DEF lines DEF level/sending unit DEF pump module (if shown) Wiring harness Mounting hardware shown in photos Vehicle Information Year: 2025 Make: International 4x4 Utility Truck Cummins B6.7 Diesel Only 18,833 Original Miles Condition OEM Factory Part Low-mileage take-off No visible collision damage No cracks or broken mounting ears Stored indoors after removal Sold exactly as pictured

$1,200

Strafford, MO

VIN: 3HAEEMMN6SL314998

Item Description For sale is a complete OEM Cummins aftertreatment assembly removed from a 2025 International 4x4 utility truck with only 18,833 original miles. This assembly was removed from a collision-damaged truck. The cab sustained severe damage, but the aftertreatment assembly was protected behind the cab and appears to be in excellent condition. The assembly includes the major emissions components (DOC/DPF/SCR) along with the attached sensors, modules, brackets, and mounting hardware shown in the photos. Cummins identifies aftertreatment assemblies by serial/assembly information rather than just individual part numbers, and QuickServe provides reference information for identifying the correct assembly. QuickServe Online Includes Complete DOC / DPF / SCR assembly OEM mounting cradle OEM brackets NOx sensors Temperature sensors Differential pressure sensors DEF doser components (as shown) Wiring harnesses attached Heat shields All components shown in photos Removed From 2025 International Utility Truck Cummins B6.7 280 HP 18,833 Original Miles 4x4 Chassis Collision damaged vehicle Condition OEM take-off Low-mileage assembly No visible impact damage to the housing Stored indoors after removal Sold exactly as pictured

$3,500

Strafford, MO

VIN: 3HAEEMMN6SL314998

Detroit Diesel Series 60 Complete Engine Assembly Good-running Detroit Diesel Series 60 electronic diesel engine, removed from a running truck and tested before removal. Approximately 200,000 miles since rebuild Donor truck showed approximately 1,100,000 total miles Good runner when tested in the truck Complete running take-out Stored indoors on a heavy wood skid Sold exactly as pictured Equipment Included as Pictured Turbocharger Detroit Diesel electronic engine controls/ECM Air compressor Alternator A/C compressor Starter Cooling fan and fan hub Intake and exhaust components Flywheel housing and clutch/flywheel components Attached wiring, brackets, hoses, and accessories The donor truck showed approximately 1,100,000 miles. The engine was rebuilt approximately 200,000 miles before removal, meaning it has about 200,000 miles of use since the rebuild. It was tested in the truck and confirmed to be a good-running engine before removal.

$7,000

Strafford, MO

VIN:

Complete OEM Altec Rotation Gearbox Assembly with Hydraulic Motor & Valve Block Genuine OEM Altec Hydraulic Rotation Gearbox Assembly Up for sale is a genuine Altec hydraulic rotation gearbox / swing drive assembly removed from an Altec digger derrick or utility boom truck. This is a complete assembly including the hydraulic drive motor and hydraulic valve/manifold. These gearboxes are commonly used on Altec digger derricks and utility boom trucks to provide continuous boom rotation. This is an original OEM Altec component—not an aftermarket replacement. Specifications Manufacturer: Altec Part Number: 990115280 Serial Number: 53471W2412890233 Hydraulic Motor P/N: 354-40065 Lubricant: Mobil 600XP460 Made in USA Includes Rotation gearbox Hydraulic motor Hydraulic valve/manifold assembly All components shown in photos Condition Complete take-off assembly No visible cracks or broken mounting ears Normal cosmetic wear Clean mounting surfaces Stored indoors after removal Ready for installation or rebuilding Please verify compatibility with your equipment before purchasing. Shipping Ships via LTL Freight Local pickup available in Strafford, Missouri Freight shipping available anywhere in the United States Buyer may arrange their own freight carrier

$4,500

Strafford, MO

VIN: 3HAEEMMN6SL314998

Genuine OEM Altec Derrick Control Module Up for sale is a genuine Altec Derrick Electronic Control Module removed from a late-model Altec derrick truck. Part Number: 970549257-D Assembly Date: 10/15/2024 Application: DC-45147 Compatible with: DH45 DH48 DH50 D3000H DT65H This module includes: OEM control module RMC Outrigger Interlock Module (mounted) Mounting bracket Factory electrical connectors Relay Functions: K1 – Interlock K2 – Selector K3 – Unloading 2 K4 – Unloading 1 Removed from a low-hour utility truck. Condition Clean OEM take-off Connectors are in excellent condition No broken housings No major corrosion See photos for cosmetic condition

$1,000

Strafford, MO

VIN: 3HAEEMMN6SL314998

Description Complete Muncie Power Products PTO with Parker hydraulic pump removed from a late-model Allison-equipped truck. This is a complete hydraulic drive package ideal for dump trucks, wreckers, roll-offs, vacuum trucks, cranes, and other PTO-driven hydraulic systems. Specifications PTO Manufacturer: Muncie Power Products PTO Model: 97X81J09731 Build Date: 09/17/2024 Hydraulic Pump: Parker Parker Model: 718460 Made in France Complete pump and PTO assembly

$2,000

Strafford, MO

VIN: 3HAEEMMN6SL314998

Take-out Allison automatic transmission removed from a late-model vocational truck. Transmission includes the output yoke and is in clean, complete take-out condition. PTO and hydraulic pump are available separately and are not included with this listing. Specifications Manufacturer: Allison Transmission Model: T1DB Serial Number: 6512008150 Heavy-duty automatic transmission Output yoke included Take-out assembly Ready for inspection

$4,500

Strafford, MO

VIN: 3HAEEMMN6SL314998

2024 Cummins B6.7 Diesel Engine – 280 HP – 18,833 Miles Specification Details Engine Cummins B6.7 Engine Serial Number 99329968 Model B6.7 280 Horsepower 280 HP @ 2,400 RPM Peak Torque 660 lb-ft CPL 5963 Emissions EPA 2024

$8,500

Strafford, MO

VIN: 3HAEEMMN6SL314998