Parts catalog

Genuine OEM DEF tank assembly removed from a 2025 Kenworth T880 donor truck. DONOR VEHICLE: • Year: 2025 • Make: Kenworth • Model: T880 • Donor VIN: 1XK7DP9X6SJ190120 ITEM DETAILS: • 27.5-gallon maximum capacity • DEF tank/reservoir • Stainless-steel outer cover • Blue DEF filler cap • Pump and control components • Mounting brackets • Wiring harnesses and connectors • Hoses and lines • Includes everything shown in the photographs CONDITION: Used take-off assembly with normal dirt, surface wear, scratches, and signs of previous installation. Please carefully inspect all photographs for condition and included components. The photographs show the exact item being sold. FITMENT: Buyer is responsible for confirming compatibility before purchase. Match the donor VIN, component numbers, connectors, mounting locations, and photographs to your truck. Contact us with your VIN if you need help checking fitment. SHIPPING: Freight shipping or local pickup may be available. Commercial delivery address with a loading dock or forklift is preferred. Residential delivery and liftgate service may cost extra. Sold by Misiuk Motors LLC.

Strafford, MO

VIN: 1XKZDP9X6SJ190120

Genuine power-steering reservoir assembly removed from a 2017 Volvo VNL donor truck. Includes: Power-steering fluid reservoir/tank Reservoir cap Mounting bracket Attached hoses and clamps shown Uses Dexron II or Dexron III power-steering fluid The QR-code photo identifies the donor truck and is not a part number. Please compare the reservoir, mounting points, hose connections, and photos with your original part before ordering. Compatibility is the buyer’s responsibility. Seller: Misiuk Motors LLC Location: Missouri

Strafford, MO

VIN: 4V4N19DG1HN981652

Genuine used hood latch with bracket assembly removed from a 2017 Volvo VNL donor truck. OEM Volvo component Hood latch and bracket assembly Includes only the parts shown Bracket/outer structure is cracked and broken Scratches, paint loss, and normal salvage-yard wear Donor-truck QR code is for identification only Verify fitment using the photos and your original part before purchasing

Strafford, MO

VIN: 4V4N19DG1HN981652

Genuine hood latch with mounting bracket assembly removed from a 2017 Volvo VNL donor truck. Complete latch and long support bracket assembly Includes the components shown in the photos Used OEM part Visible scratches, scuffs, and paint transfer Donor-truck information is shown in the QR-code photo Verify mounting points and fitment before purchasing Donor vehicle: 2017 Volvo VNL VIN: 4V4N19DG1HN985875 Seller: Misiuk Motors LLC

Strafford, MO

VIN: 4V4N19DG1HN981652

Used right-side/passenger-side front frame horn assembly removed from a 2017 Volvo VNL donor truck. Includes: Right/passenger frame horn Front tow eye/tow hook Bumper mounting brackets Additional attached brackets and hardware shown Everything pictured is included Visible casting/identification numbers include 20484498 and 82722740. Please verify these numbers, mounting points, and fitment before purchasing. The QR code and donor information are provided for vehicle identification only and are not included with the part. Donor vehicle: 2017 Volvo VNL Side: Right/passenger side Stock/reference number: 785875 Condition: Used Brand: Volvo OEM Part type: Frame horn/towing-support and bumper-bracket assembly Freight or commercial shipping may be required due to the size and weight. Contact the seller with a commercial delivery address and ZIP code for a shipping quote. Local pickup is also available.

Strafford, MO

VIN: 4V4N19DG1HN981652

Used OEM left/driver-side front frame horn assembly removed from a 2017 Volvo VNL donor truck. Assembly includes the components pictured: Left-side frame horn/support bracket Heavy-duty tow hook Bumper and mounting brackets Attached hardware and brackets shown Visible bracket number: 82722750 Normal dirt, surface rust, scratches, and cosmetic wear from prior use and outdoor storage. No obvious major cracks or breaks were noticed in the photographed components. Please carefully review all pictures for exact condition and included parts. The QR code shown is for donor-truck identification only and is not a part number for this assembly. FitmentDonor vehicle: 2017 Volvo VNL Placement: Front left / driver side Part type: Frame horn, bumper support and tow-hook assembly Manufacturer: Volvo Material: Steel Sold exactly as pictured Volvo number 82722750 identifies an inner bumper bracket and may replace numbers 82374171 and 20470354; it should not be treated as the part number for the entire assembly. Truck Part Center Buyer must compare the pictures, mounting points, and visible numbers with the original part before purchasing. Compatibility is the buyer’s responsibility.

Strafford, MO

VIN: 4V4N19DG1HN981652

Used Freightliner rear tail-light assembly removed from a donor truck. Includes: Steel mounting bracket Two round red LED stop/turn/tail lights One clear reverse light Small license-plate/utility light Attached wiring and connectors Mounting hardware shown Assembly has normal dirt, oxidation, scratches, and general wear from commercial use. No major cracks are visible in the lenses. Lights have not been bench tested, so the complete assembly is being sold as-is. Exact year, model, mounting side, and interchange are currently unknown. Please compare the bracket, electrical connectors, mounting points, and measurements with your original assembly before purchasing. Only the items shown in the photos are included.

Strafford, MO

VIN:

Genuine-style PACCAR rear tail-light bar assembly removed from a heavy-duty truck. Includes: Black steel mounting bracket/panel Two red round LED stop/turn/tail lights Two clear round LED reverse lights Wiring harness and connectors Center license-plate light Mounting brackets and hardware shown May fit various Kenworth and Peterbilt trucks or cab-and-chassis applications. Exact year, model, and part number could not be confirmed. Buyer must compare the mounting points, wiring connections, dimensions, and photos before purchasing. Sold exactly as pictured. No additional parts are included. Item specifics: Brand: PACCAR / Grote-style Type: Rear tail-light bar assembly Lighting technology: LED Light configuration: Two red and two clear Placement: Rear Material: Steel Color: Black Fitment: Kenworth, Peterbilt, and other heavy-truck applications Condition: Used Manufacturer part number: Unknown

Strafford, MO

VIN:

Genuine OEM left- and right-side frame rail pair removed from a 2025 Kenworth T880 donor truck. Donor Truck InformationYear: 2025 Make: Kenworth Model: T880 VIN: 1XKZDP9X6SJ190120 Quantity: Two frame rails Condition: Used OEM takeoff Approximate MeasurementsRail height/web: 11-3/4 inches Flange width: 3-1/2 inches Material thickness: approximately 3/8 inch Existing factory mounting holes Exact overall length should be confirmed before listing The rails appear straight in the supplied photographs. They have normal cosmetic wear from removal, handling, and outdoor storage. No guarantees are made regarding exact fitment or alignment. Buyer must verify measurements, hole locations, VIN compatibility, and fitment before purchase. Sold exactly as pictured. Hardware, crossmembers, brackets, and other frame components are not included unless shown. Item SpecificsBrand: Kenworth Type: Frame Rail Manufacturer Part Number: Unknown Material: Steel Placement on Vehicle: Left and Right Vehicle: Kenworth T880 Model Year: 2025 Condition: Used Vintage Part: No Performance Part: No Universal Fitment: No Quantity: Pair Donor VIN: 1XKZDP9X6SJ190120 ShippingCommercial freight shipping or local pickup. Buyer should contact the seller with a business ZIP code and indicate whether a loading dock or forklift is available. Residential delivery and liftgate service cost extra.

Strafford, MO

VIN: 1XKZDP9X6SJ190120